Epoxy Resin Mold 60cm × 60cm × 6cm (24″ × 24″ × 2.5″)
The 60 × 60 is our square-format panel mold — 24 × 24 inches with a 6cm depth. It’s designed for makers producing square resin tabletops, large decorative tiles, display boards, and wall panels where a symmetrical form is part of the design.
Square Format Resin Panels and Decorative Surfaces
Square resin panels have become increasingly popular in interior design — as side table tops, wall art pieces, and decorative display surfaces. The challenge with square pours is maintaining even resin distribution across the form. A tapered or slightly warped mold produces a piece that isn’t quite square, which shows immediately on a flat surface.
The 60 × 60 addresses this with machined flat surfaces and straight sides. The 6cm depth gives you enough volume for substantial decorative pieces without the exothermic heat risks of very deep pours. The square format also makes it straightforward to produce tiled arrangements — multiple identical pieces that sit together cleanly.
For makers producing contemporary interior pieces, this mold gives you a reliable form for a shape that sells consistently well.
Why Choose This Size
- Square format suits tabletops, wall panels, and decorative display surfaces
- 6cm depth is substantial without creating excessive curing heat
- Flat machined base ensures even resin distribution across the full surface
- Straight sides produce true square edges — essential for tiled arrangements
- Consistent dimensions allow multiple matching pieces from repeated pours
Build Quality
Precision-machined panels and threaded insert assembly give this mold clean internal dimensions and straight sides that hold their shape across repeated pours. No release spray required — the surface is naturally non-stick, so the resin releases without preparation. Assembles in under two minutes and disassembles just as quickly. Seal the edges with standard silicone before each use. That’s the only step between you and a clean pour.
Specifications
60cm × 60cm × 6cm (24″ × 24″ × 2.5″) | Tolerance: ±2mm | Assembly: threaded inserts and bolts
All measurements are ±2mm unless otherwise specified.
Need a different size? We produce custom dimensions to suit your specific project requirements. Get in touch and let us know what you need.